Pool cues are valuable, but they can be dangerous, especially in homes where small children live. Unsupervised kids will grab the sticks and run off with them, and they can break or damage the cues easily. Pool cue racks can help prevent this from happening. Pool cue racks are also helpful in protecting your wall from damage when they are mounted on the wall. If you don't want to mount them to the wall, you can build a stand to hold them. These 10 DIY Pool Cue Rack Plans come with easy-to-understand and clear instructions on how to build them.
DIY Pool Cue Rack
A cue rack is an absolute must for anyone who owns a pool table. The nice thing about making your own holder is that it is a lot less expensive than buying one. In this article 10 DIY Pool Cue Rack Plans for holding your pool cues. The one you choose will depend on how much time and money you want to devote to the project. The plans vary in complexity and depending upon your skill level, some are better suited to a beginner than others.
Wall Mounted 6 Cue Holder from Corey Rametta
This pool cue rack is designed for those looking for a wall-mounted design made from walnut. It's an elegant design made of walnut, and you're going to need some woodworking experience, in addition to a fair amount of tools to build it. What makes this project special is that it's a wall-mounted design. Many people don't have the available space on their floor for a pool cue rack, which means they just stack their cues wherever they can find space.
This wall-mounted design eliminates that problem and allows the cues to be placed out of the way while still being accessible. The woodworking skills required are intermediate level at best. The end result looks very nice, but there is a lot of work involved in getting your cues mounted on the wall. If you want something that looks great but doesn't require a ton of work, keep looking around the internet for an easier build.
TOOLS:
- drill press
- table saw
- scroll saw/jigsaw
- torch
- clamps
- square
- drum sander
- Router/ router table
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
Transforming Pool Cue Rest
A pool cue is a must-have for anyone who likes to play pool. And what better way to store it than in this transforming pool cue rest? This cleverly designed piece of furniture takes up very little space, and when you are finished playing, the cue can be stowed away safely and neatly. There are people who are really good at making a DIY project but there are some who really don't know where to start. For those people, It is recommended that they should try making something simple like transforming a pool cue rest. It is really easy to make and it doesn't require much time or effort to do so. All you need to do is to look for the right instructions first and then start working on it.
TOOLS:
- Table saw
- Belt sander
- Drill press
- Scroll saw
- Hammer
- Punch set
- Hack saw
- Tape measure
- Square
- Drill bits
- ClamPS
MATERIALS:
- ¼" x 4" x12" wood (I used alder)
- ¾" African hardwoods
- Wood glue
- ⅛" brass rod
- ⅜" brass rod
- Wood finishing producers
- Sandpaper
- 2 part epoxy
- Leather
12 Pool Cue Rack from Andy Rawls
It’s the little things that count sometimes. This is especially true if you are a pool player who loves to host game nights with your friends. While you may have a pretty sweet table, if you don’t have some stylish cue racks to organize your cues, it may not be enough. Pool cues can get pretty expensive, which makes it imperative that they are properly taken care of. You wouldn’t want to accidentally ding one of your favorite cues, would you?
One of the best ways to protect your pool cues is by storing them in a proper cue rack. Cue Racks range from simple and functional to intricate designs that are sure to impress any guest who steps foot inside your home. The great thing about cue racks is that they come in many different sizes and styles. You can find one that fits just about any decor or room.
TOOLS:
- Table saw
- Belt sander
- Drill press
- Scroll saw
- Hammer
- Punch set
- Hack saw
- Tape measure
- Square
- Drill bits
- ClamPS
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
1-Hour DIY Cue Rack from Saldana Designs
The Cue Rack is an essential accessory for any pool room. It's a place to store your cues and keep them from being damaged. The main idea behind the Cue Rack is that the cues go into the holes, but don't all the way through. The spaces in between are wide enough to prevent the cue from falling out and keep it in place. The mounting brackets are attached to the wall and then the rack is screwed to them. That way, you can have it hung up in no time at all. You can use any material you'd like, but make sure it's strong enough. Other than that, this is a really easy project that anyone can do.
TOOLS:
- drill press
- table saw
- scroll saw/jigsaw
- torch
- clamps
- square
- drum sander
- Router/ router table
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
Simple Pool Cue Rest
The pool cue rest uses a wooden base that has notches carved out of it. The pool cues sit in these notches. To keep the cue rest from sliding off the edge of the table, you can use lead fishing weights. If you're looking for a simple pool cue rest, this plan might be perfect for you. This project is also very forgiving in terms of size adjustments, so you can probably build it with scrap wood from your own workshop or from a local lumber yard without having to buy very much material. It's relatively easy to build and doesn't have any complicated steps or difficult-to-find materials. The only tools required for this project are a drill, wood glue, a saw, sandpaper, stain and polyurethane.
TOOLS:
- Table saw
- Belt sander
- Drill press
- Scroll saw
- Hammer
- Punch set
- Hack saw
- Tape measure
- Square
- Drill bits
- ClamPS
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
Affordable Wall Mount Cue Holder from Chuck Huff
A wall mount cue holder is a great way to store your pool cues. It keeps them out of the way and secure, while still allowing easy access when you need to get your cue. If you're looking for a wall mount cue holder, consider the affordable option from Chuck Huff. The top-mounted door on this cue hanger is wide enough that you can use it to get a full view of all of your cues at once. This means that you can quickly grab the one that you're looking for without having to take time to carefully look through everyone. The door also has a lock that keeps it securely closed, keeping your cues safe from damage.
TOOLS:
- Table saw
- Belt sander
- Drill press
- Scroll saw
- Hammer
- Punch set
- Hack saw
- Tape measure
- Square
- Drill bits
- ClamPS
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
Sliding Dovetail Pool Cue Rack from Third Coast Craftsman
Let's face it, pool tables are cool. There's nothing better than a few guys or a bunch of friends getting together for a few beers and some serious pool. And the first thing you need to do is get the cues racked up so everyone can play. While you can buy a cue rack from almost anywhere, why not make your own? With this pool cue rack design, you'll be able to hold 8 cues, and using as little plywood, you'll have this slick rack ready in no time.
But what makes this different is that the cues are held in place by an intricate finger-carved dovetail joint instead of just simple holes drilled into the wood. The process of making these joints is not overly complicated, but it does require some patience and skill to create perfect little notches that will keep your cues safe when moving them around.
TOOLS:
- drill press
- table saw
- scroll saw/jigsaw
- torch
- clamps
- square
- drum sander
- Router/ router table
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
Interior Door Billiard Rack from Tommy Boy DIY
A billiard rack that fits on the interior of a door is an easy way to store your cue sticks and balls. The rack is very simple to build and will fit inside any standard door. It can also be made to hold cues, pool balls, and various accessories all in one place. This billiard rack can be easily modified for smaller cue sticks by simply reducing the length of the dowel rods you use. You can also modify the size of holes by adjusting the length of the screws you use. If you're a fan of billiards and you're looking to display your rack in a new way, then follow this instructional guide to learn how to convert an interior door into a billiard rack.
TOOLS:
- Table saw
- Belt sander
- Drill press
- Scroll saw
- Hammer
- Punch set
- Hack saw
- Tape measure
- Square
- Drill bits
- ClamPS
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
Pool Cue Stand – Made from a Pool Cue from League Customs
If you have more than a few pool cues, it can be hard to keep them organized. This DIY project from League Customs is the perfect solution for anyone with a bunch of cues and limited space. Start by cutting the pool cue in half. Then, drill holes in the remaining pieces and screw or nail them together to create the rack's frame. You can also add a small wooden base to the bottom of the cue if you want to make it stand up on its own. Use wood glue to secure the ball onto your new cue rack, and then your cues will hold in place on top. Your cue rack is ready!
TOOLS:
- Table saw
- Belt sander
- Drill press
- Scroll saw
- Hammer
- Punch set
- Hack saw
- Tape measure
- Square
- Drill bits
- ClamPS
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
The Gatsby Cue Rack
The Gatsby cue rack is the most versatile cue rack on the market, and it is the original fold-able cue rack. It is made of heavy-duty steel with a durable powder coat finish. This cue rack is easy to assemble and easy to store with its unique fold-down design. The Gatsby cue rack comes with a lifetime replacement warranty. All Gatsby products are backed by superior customer service. The Gatsby Cue Rack is a modern take on classic billiard racks. It's designed to store and display your cues without scratching them and sits perfectly on top of any pool table or garage shelf.
TOOLS:
- drill press
- table saw
- scroll saw/jigsaw
- torch
- clamps
- square
- drum sander
- Router/ router table
MATERIALS:
- hardwood
- leather
- lead/steel bar
- glue
- old mouse pad
- varnish
Conclusion:
Pool cue racks take up very little space, yet are extremely important for keeping your cues in good working order. If you want your cue sticks to last as long as possible. Then it is critical that you put them away properly. Creating a simple DIY pool cue rack is a smart way to make sure that your cues are not damaged or scratched when they are not being used. Create something unique and original that is sure to impress all your friends.
